IEC 60317-38 Ed. 2.0 b:2013

IEC 60317-38:2013 specifies the requirements of enamelled round copper winding wire of class 200 with a triple coating. The underlying coating is based on polyester or polyesterimide resin, which may be modified providing it retains the chemical identity of the original resin and meets all specified wire requirements. The secondary coating is based on polyamide-imide resin. The third coating is a bonding layer based on a thermoplastic or thermosetting resin. NOTE – A modified resin is a resin that has undergone a chemical change, or contains one or more additives to enhance certain performance or application characteristics. The range of nominal conductor diameters covered by this part is:

– Grade 1B: 0,050 mm up to and including 1,600 mm;

– Grade 2B: 0,050 mm up to and including 1,600 mm. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-1:2013. This second edition cancels and replaces the first edition published in 1992, Amendment 1:1997 and Amendment 2:1999. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:

– new 3.2.2 containing general notes on winding wire, formerly a part of the scope;

– revision to references to IEC 60317-0-1:2013 to clarify that their application is normative;

– new Clause 23, Pin hole test. Key words: requirements of enamelled round copper winding wire, class 200, triple coating