ASTM F887-23
Original price was: $90.00.$45.00Current price is: $45.00.
Standard Specifications for Personal Climbing Equipment
ASTM International , 11/01/2023
Pages: 34
Table of Contents Section Title Section/Paragraph Scope 1 Referenced Documents 2 Terminology 3 Significance and Use 4 Pole and Tree Climbers Classification 5 Ordering Information 6 Pole and Tree Climbers 7 Climber Gaffs 8 Climber Straps 9 Climber Pads 10 Climber Footplates 11 Body Belts, Positioning Devices and Wood Pole Fall Restriction Devices (WPFRD) Classification 12 Ordering Information 13 Two Dee Body Belts, Auxiliary Positioning Belts, and Four Dee Body Belts 14 Two Dee Body Belts 14.1 Auxiliary Positioning Belts and Four Dee Body Belts 14.2 Positioning Devices 15 Wood Pole Fall Restriction Device (WPFRD) 16 Arborist Saddle 17 Harnesses Classification 18 Ordering Information 18.2 Sizing 18.3 Marking 18.4 Energy Absorbing Lanyards Classification 19 Ordering Information 20 Energy Absorbing Lanyards 21 Qualification Testing After Exposure to an Electric Arc 22 Hardware Requirements 23 Test Equipment 24 Qualification Testing 25 Body Belts, Four Dee Body Belts, and Auxiliary Positioning Belts 25.1 Positioning Devices 25.2 WPFRD 25.3 Arborist Saddle 25.4 Harness 25.5 Energy Absorbers 25.6 Instructions 26 Guarantee and Rejection 27 Keywords 28
1.1This standard covers the specifications and qualification testing of the following:
Climbers, Climber straps, Climber Pads, Climber Footplates, Body Belts, Work Positioning Devices with Locking Snaphooks/Carabiners, Wood Pole Fall Restriction Devices (WPFRD), Arborist Saddle, Harnesses, Energy Absorbing Lanyards.
These devices are used by workers in the climbing of poles, trees, towers, and other structures. Minimum performance criteria for harnesses and energy absorbing lanyards in arresting a fall after exposure to electric arcs are included for workers who may be exposed to thermal hazards of momentary electric arcs or flame.
1.2Equipment may fall within one of the following categories:
1.2.1Fall (Travel) Restraint-Prevents a user from reaching a fall hazard (allow 0 fall distance).
1.2.2Work Positioning-Allows a 2 ft maximum free fall distance.
1.2.3Fall Arrest-Allows a 6 ft maximum free fall distance with a maximum arrest force of 1800 lb.
Note 1:Under certain conditions and with the use of equipment designed for such conditions, a 12-ft free-fall distance with a maximum arrest force of 1800 lb is allowed.
1.2.4Suspension-Allows 0 free-fall distance while supporting the user”s weight.
1.2.5Fall Restriction-to prevent or limit free fall from a work position or while ascending/descending a wood pole.
1.3Three types of climbers, (Types A, B, and C) and two types of climber straps, Types (A and B) are covered.
1.4Two types of body belts, (Types A and B) are covered.
1.5Eight types of work positioning devices: three positioning straps, (Types A, B, and C), three adjustable-positioning lanyards, (Types A, B and C) and two nonadjustable positioning lanyards, (Types A and B) are covered.
1.6Two types of WPFRD, (Types A and AB) are covered.
1.7Arborist saddle, (Type A) Work Positioning and Suspension are covered.
1.8Two types of harnesses, (Types A and B) are covered.
1.9Two types of energy absorbing lanyards, (Types A and B) are covered.
1.10The values stated in United States customary units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.11The following safety hazards caveat pertains only to the test method portions, 9.2, 10.3, 11.2, 14.1.4, 15.3, 15.4, 16.2, 17.2, 18.4, 21.2, 22, 23, and 25 of this standard: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.12This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Related products
Original price was: $65.00.$32.00Current price is: $32.00.
Original price was: $52.00.$26.00Current price is: $26.00.
Original price was: $52.00.$26.00Current price is: $26.00.
Original price was: $58.00.$29.00Current price is: $29.00.
Original price was: $52.00.$26.00Current price is: $26.00.
Original price was: $52.00.$26.00Current price is: $26.00.
Original price was: $65.00.$32.00Current price is: $32.00.
Original price was: $52.00.$26.00Current price is: $26.00.